RAM™ 280-F Frozen Fry Dispenser
Copyright © 2011 Automated Equipment LLC All rights reserved.
21
D08
Reset Refrigeration
Errors # 5, #6 & #7
Clears and resets any active refrigeration errors (errors 5, 6 &
7)
Display defaults to “
Er. no
”
Press up arrow, display will read “
Er.YES
”
Down button will return to “
Er. no
”
Press enter button to execute and return to D01.
D09
Actuate Outputs
Note:
Basket Size
Buttons also function
as numbers
Note:
The
refrigeration circuit
contains anti-short-
cycle protection.
Allows outputs to be turned on and off to aid in diagnosing
problems.
Display shows selected motor and command. (i.e. “
d2 on
”
indicates the right drum motor’s output is on.)
Use Basket Size Buttons to select an output:
1.
Left Drum motor (
d1
)--Left Small Basket
2.
Left Accumulator motor (
A1
)--Left Medium Basket
4.
Right Drum motor (
d2
)--Right Small Basket
5.
Right Accumulator motor (
A2
)--Right Medium Basket
6.
Refrigeration compressor (
rF
)--Right Large Basket
Up arrow turns output on,
Down arrow turns output off.
Enter button closes function.
The display flashing “
rF
OFF
” indicates the refrigeration
compressor cannot be restarted until the 2 minute short cycle
delay is met.
All outputs will turn off and return to normal operation when
exiting the function.
D10
Diagnostics Display
Note:
See
page 26
Shows status of all controller Inputs and Outputs while the
dispenser continues normal operation.
Display shows all activated Inputs and Outputs.(see
page 26
)
Size and Enter buttons function just as in main screen
during normal operation.
Up Arrow Button does nothing.
Down Arrow button will exit the function.
D11
Bypass Basket
Sensors
Note
: Volatile setting.
(will reset each time
power is cycled)
Allows the dispenser to be used when a basket sensor has
failed.
Display will read “
[bYP]
” with alternating flashing brackets.
Use Basket Size buttons to select the side to be
bypassed.
Display will default to the current sensor condition.
Up arrow sets bypass mode. “
[ YES
” ( “YES]”)
Down arrow clears it. “
[ no
” (“ no]”)
Enter button executes selection, exits function and
returns to D01
D12
Bypass Weighing
Note
: Volatile Setting
Disable the scale to allow other diagnostics to be performed
without wasting product.
Display will read “
[SCL]
” with alternating flashing brackets.
Use Size Keys to select the side to be bypassed.
Display will default to current scale status.
Up arrow turns the scale on for selected side.
“
[ on
” (“ on ]”)
Down arrow turns off the scale for selected side.
“
[ OFF
” (“ OFF ]”)
Enter button executes selection, exits function and
returns to D01