RAM™ 280-F Frozen Fry Dispenser
Copyright © 2011 Automated Equipment LLC All rights reserved.
13
Dispenser Startup
Make sure Power Switch, located on the left portion of the operator panel, is turned off. Assemble the
Dispenser (
Pages 6-11
). Plug the Power Cord into an approved outlet and turn the Dispenser on.
Note: Turn Dispenser on a minimum of 90 minutes (depending on ambient temperature
conditions) before loading frozen product into the Dispenser. Once the temperature display has
dropped to 10
°
F (-12
°
C) load frozen product into Dispenser and use the Dispenser.
The Operator Panel consists of a Power Switch and three groups of controls: the Left Hopper controls,
center System controls with Data Display, and the Right Hopper controls. Each Hopper is controlled as
if it were an independent dispenser.
On power up, the display will very briefly show the Software Name, Software Version, Copyright Notice,
and then the Main Screen (typically the dispenser temperature). The Dispenser will NOT respond to
keypad selections before the Main Screen is displayed.
The Main Screen will appear as shown above. The number displayed in the center represents the
interior cabinet temperature.
The operator panel is used to make basket load size selections and to access controller functions.
Note:
The Managers Menu and Diagnostic Menu may require a manager’s password to
access the Functions. By Default these Passwords are disabled.
•
Use the Up
and Down
Arrow Buttons to access a desired function. (See
pages 18-22
for a complete list of functions and their descriptions.)
•
Press the Enter
Button to select the desired function.
•
Basket Size Buttons also function as numbers:
(e.g. Left Small=1, Left Medium=2, Left Large=3, Right Small=4, Right Medium=5, Right Large=6)
Up Button
Enter Button
Down Button
Display
Small loads
Medium loads
Large loads
Power Light
Power Switch
Basket Size
Buttons
Basket Size
Buttons