6
Installation Procedure (continued)
4.
Secure ADI-100 with the supplied dual lock tapes and screws.
Please refer to the section on Securing ADI-100, Step by Step.
5.
Minimize coiling loops of excessive power cable and antenna cable, and do not
secure them on ADI-100. Please refer to section on Installation do and don’t.
6.
Plug one end of the power cable to ADI-100, and the cigarette-lighter plug into
car’s cigarette lighter. There is a lock mechanism on the plug of Power Cable
to ADI-100. First, plug the power cable into the 12V DC jack (1), and then you need
to turn the power plug 90 degree clockwise (2) as illustrated below. This is to ensure
that the power cable will be firmly connected to the ADI-100 at all time.
Attention
1.
Anytime you need to disconnect/connect the antenna from ADI-100, please unplug
ADI-100 from the cigarette lighter first to avoid possible damage to the antenna.
2.
Damage resulted from incorrect installation of the antenna is not covered by the
warranty.
7.
Start using ADI-100 with the remote
control, please refer to the sections
on OPERATION CONTROLS and
STARTING UP THE SYSTEM.