12
STARTING UP THE SYSTEM
1.
Turn on your in-car audio system.
2.
Enable the AF function on your car radio if it is equipped (Consult your car radio
manual or the car dealer if your car radio has AF feature, and how to enable AF
feature).
3.
Tune the car radio’s FM frequency to FM 87.6MHz, which is the same as ADI-100
default FM TX frequency.
4.
Start ADI-100 by plugging the cigarette-lighter power plug into the cigarette lighter,
the audio system display will show ( DABRADIO ).
5.
ADI-100 will perform a Scan of DAB stations automatically.
6.
If FM 87.6MHz is already used by a FM broadcaster or the station is noisy, change
the initial FM TX frequency as below:
Operating on ADI-100
u
Press and hold LINK for 3 seconds, ADI-100 will set a new and
clear frequency to transmit the FM signal.
Operating on Car Radio
u
Use auto scan function of your car radio to search for an FM
broadcast having program service name ( DABRADIO ).
Stay tuned on this FM frequency, your ADI-100 and car radio are
now
synchronised.
7.
If your car radio does not have AF feature, do the following to change ADI-100’s
FMTX mode to AutoScan instead of the default AFC.
7.1
Press
the
Rotary Knob and then MENU to enter the menu function.
7.2
Rotate
the
Rotary Knob
(
t
) / (
u
)
until the screen shows ( LINKMODE ).
7.3
Press
the
Rotary Knob, and then rotate the Rotary Knob
(
t
) / (
u
)
until the
screen shows ( AUTOSCAN ).
7.4
Press
the
Rotary Knob, the function of AutoScan is now enabled and
the ADI-100 is operating in the AutoScan mode.
8.
Listen to the DAB stations. Please refer to USING REMOTE CONTROL KEYS section for
the system operation.
9.
While you are using AutoScan function and you are experiencing noise on the
listening DAB station, please refer to To Set FM Transmitting Frequency in AutoScan
Mode
to select a auto scanned FM frequency, or To Set FM Transmitting Frequency
Manually to manually switch to another FM frequency.
10.
To avoid unnecessary draining of the car battery when ADI-100 is idle, after 4 hours
of idling from the user’s last action, ADI-100 will be automatically turned off.
While in the standby mode, press the Rotary Knob to return ADI-100 back to the
operating mode.