13
To Turn On or Off ADI-100
The ADI-100 operating mode can be turned off or turned on by the following:
1.
Press and hold the Rotary Knob to turn it off, while ADI-100 is in the operating mode.
2.
Press the Rotary Knob to return it to the operating mode, while ADI-100 is off.
To Scan for the DAB Stations
This function searches for all DAB stations in Band III from channel frequency 5A to channel
frequency 13F that are available in the area where your car is presently located. Stations
found as a result of the search are added to the station list in the alphabetical order. To
scan for the DAB stations, do the following:
1.
Press the Rotary Knob then SCAN to do a full scan of DAB stations, the screen will
show ( SCANNING ).
USING REMOTE CONTROL KEYS
Note:
Each time you start ADI-100, if the station list is empty, it will perform a Full Scan
of DAB stations automatically. You may also need to perform a Scan function
if you drive your car to a new area where the broadcasting DAB stations are
not on the current station list.
While the Scan operation is in process, you can press the Rotary Knob at any
time to stop Scan function and revert to listening to the currently selected
station.
If the DAB Station List is not empty before scanning then after completion of
DAB Scan, the ADI-100 will revert to playing the last DAB station automatically.
If the DAB Station List is empty before scanning, the ADI-100 will tune in the first
station of the new DAB Station List resulted from this DAB Scan.
If the DAB Station List is empty before scanning, and there is no station
detected by DAB Scan, the screen will show ( EMPTY ). There are no DAB
stations available in the area where you performed DAB Scan function.
To Listen to the DAB Stations
There are two options available for you to select and listen to a DAB station: Quick Tune
and Step Tune. Step Tune is used when you want to step through the list of stations one by
one and in alphabetical order. Quick Tune allows you to move more quickly through the
list of stations by advancing to the first station in the previous/next alphabet character in
the station list. Once you have reached the desired initial alphabet character; you can
then use Step Tune to refine move to the desired station.