background image

Setting Up Video Hardware

Topics in this chapter:

Video I/O Setup

 on page 17

Standard VTR Control Cable Pinout

 on page 23

Setting Up VTR Emulation

 on page 23

Video I/O Setup

Use the information and wiring diagrams in this section to connect the video I/O components and a broadcast
monitor to the HP xw9400 workstation.

Depending on the video preview device the workstation is equipped with, and on whether the Real-Time
Deliverables (RTD) feature will be used or not, there are three possible video I/O configurations for your
workstation:

For workstations equipped with a Miranda DVI-Ramp2 as a video preview device, see 

Video I/O Setup

for Workstations Using a DVI-Ramp2

 on page 18.

For workstations equipped with a NVIDIA Quadro SDI board as a video preview device, without support
for Real-Time Deliverables, see the first wiring diagram in 

Video I/O Setup for Workstations Using the

NVIDIA Quadro SDI Board

 on page 20.

For workstations equipped with a NVIDIA Quadro SDI board as a video preview device, and with support
for Real-Time Deliverables, see the second wiring diagram in 

Video I/O Setup for Workstations Using the

NVIDIA Quadro SDI Board

 on page 20.

This section also lists the video components that are included with your shipment. The only video hardware
you must provide are a sync generator, a VTR, a patch panel, if necessary, and an HD/SDI broadcast monitor.

NOTE

Do not use an SD (NTSC or PAL) sync generator for HD projects. Always use a tri-level sync generator for

HD projects. Using the wrong sync generator for a project may impact the stability of your workstation.

4

17

Summary of Contents for HP xw9400























































Reviews: