Autodesk HP xw9400, Hardware Setup Manual

Page: 19 / 54

Connecting Peripherals
Topics in this chapter:
■
Peripherals Connection Diagrams on page 13
■
Connecting the Keyboard, Mouse, and Tablet on page 15
■
Network Connections on page 16
Peripherals Connection Diagrams
Before you boot your workstation, connect all hardware peripheral devices as illustrated in this chapter. For
storage connection diagrams, see
Connecting Storage on page 35.
The following two diagrams identify the ports to which the peripherals connect on the HP xw9400
workstation:
■
The first diagram illustrates the peripherals setup for an HP xw9400 workstation equipped with a NVIDIA
®
Quadro
®
FX 5500G graphics board and a DVI-Ramp.
■
The second diagram illustrates the peripherals setup for an HP xw9400 workstation equipped with a
NVIDIA Quadro FX 5600 graphics board and an NVIDIA Quadro SDI board.
NOTE All the diagrams in this document illustrate a Gigabit Ethernet (GigE) adapter located in PCI slot four. Your
workstation may also be configured with an optional QuickSilver InfiniSERV 9000 PCIe-DDR adapter that replaces
the GigE adapter. On the HP xw9400 workstation, the PCI slots are numbered one to seven from top to bottom.
For detailed information on video connections, refer to Setting Up Video Hardware on page 17.
For detailed information on audio connections, refer to Setting Up Audio Hardware on page 29.
3
13