Connecting and Configuring the ATTO Fibre Channel Adapter
Your workstation is configured with a 4-port ATTO Celerity FC-44ES fibre channel adapter in PCI slot one.
On the HP xw9400 workstation, the PCI slots are numbered one to seven from top to bottom. Consult the
peripherals connection diagram as a reference for the ATTO fibre channel adapter location.
FC loop 2
FC loop 3
To storage assembly
FC loop 4
FC loop 1
To archiving device or SAN
QLA2344 or
FC44-ES
FC adapter
Connecting Storage Enclosures
The following diagrams illustrate how to cable XR-series hardware RAID storage enclosures. Cable your
storage exactly as illustrated to ensure proper functionality.
Note that the XR 6500 series and XR 6412 series storage assemblies do not support configurations with two
XR RAID enclosures.
WARNING
Do not power on your storage before installing Linux, otherwise the Red Hat installer might attempt
to format the storage array and use it as the system disk.
XR 6500 Wiring Diagrams
The following diagrams illustrate 2-loop and 4-loops connections for XR 6500 series storage assemblies.
A XR 6500 RAID enclosure supports a maximum of seven XE expansion enclosures.
Connecting and Configuring the ATTO Fibre Channel Adapter |
37
Summary of Contents for HP xw9400
