AutoAnchor AA702, Owner'S Manual

Page: 45 / 57

44
4.10 AUXILIARY EQUIPMENT OPERATION WITH THE AA710
The AA710 can control other equipment on the boat such as pumps, davits or cleats using
the auxiliary outputs.
4.10.1 USER PRECAUTIONS
Only persons who are fully aware of the requirements for safe operation of the auxiliary
equipment should be allowed to use the AA710 to operate this equipment. The owner
of the boat must take responsibility for ensuring the equipment is used according to the
manufacturer’s instructions and with the appropriate safety precautions.
Note:
The AA710 remote console automatically turns off after a preset time without use.
Default Auto Off is 5 minutes. The Auto Off Time can be changed from between 4 to 20
minutes in the Setup menu. See page 23.
OR
Tap to access the Menu.
Scroll to “Select Mode”.
Select “Select Mode”.
Scroll to Auxiliary outputs.
Select Auxiliary outputs.
On the console use the key shown on the screen to operate
the Auxiliary output. The Auxiliary output will be highlighted
on the screen when it is active.
M = Momentary
T = Toggle
4.10.2 TO ACCESS THE AUXILIARY MODE
Turn the AA710 on.
Clear the safety lock.
Depending on the system set up.
Cycle through the modes by pressing
the button for 1 second at a time.
Auxiliary Key References
Aux A
Aux B
Aux C
Aux D