AutoAnchor AA702, Owner'S Manual

Page: 41 / 57

40
4.8.2 TO CHECK LOGS
The AA710 must be turned on.
Press to access the Menu.
Scroll to Logs.
Select Logs.
Return to the menu.
Exit and return to start screen.
Logs can be cleared if base station is reset.
4.7 TO USE WINDLASS OPTION A AND OPTION B
Use the Left arrow to turn Option A on and off.
Use the Right arrow to turn Option B on and off.
Note: If Auto wash is set it will turn on automatically during retrieval if any windlass
control is used. Control could be via the AA710 and also foot switches, toggle
switches or another AutoAnchor unit.
4.8 OTHER WINDLASS OPERATION SETTINGS
Press to access the Menu when the AutoAnchor is turned on.
4.8.1 TO CLEAR TO ZERO
The AA710 must be turned on.
Press to access the Menu.
Scroll to Clear to Zero
Select Clear to zero.
Select No/Yes.
Yes
- return to start screen.
No
- return to the menu, then press again to return
to the start screen.
4.6 USING DUAL SPEED
You must have a windlass with a dual speed motor to use this feature.
Default Speed is
slow.
Use the right arrow to toggle between fast and slow speed. The current speed is
displayed on the screen SL or FS.
If using Auto Mode select fast speed prior to selecting Auto.
The windlass automatically changes to slow speed when the docking distance is reached.
4.8.3 TO RESET SENSOR
The AA710 must be turned on.
Press to access the Menu.
Select Reset sensor.
Select No/Yes.
Yes
- return to start screen.
No
- return to the menu, then press again to return
to the start screen.
Deploy the anchor to tune the sensor. See page 37.
9
10742
112
Lock
Clear to zero
Off
Select
Mode