Auto-Sleepers Gloucester2010, Handbook

Page: 44 / 118

7-18
CONNECTION OF SERVICES
EC325 v1.3H
12:00 23.9ºC
Leisure Battery
12.5v (Good)
Vehicle Battery
13.3v (Good)
Mains Supply
ON
Leisure Battery
= Lead Acid
Fresh Water
25% Full
4.2 Menu Functions - Readings section
Main Control Panel display showing
model number (EC325), software
version number (v3.1), specification
(H), current time (12:00) and internal
temperature (23.9ºC) in centrigrade.
Display
Description
Options / Notes
The addition of an asterisk (*) in
the top left of the display
indicates that the alarm is set.
The addition of a hash (#) in the
top right of the display indicates
that the event timer is set.
The addition of the letters ‘AC”
in the centre of the display
indicates that the AC Mains
supply is switched on.
Voltage reading and battery
condition description for the on-
board leisure battery
See also 3.7C
Less than 10.9 = (Poor)
10.9 to 11.4 = (Fair)
11.9 to 14.4 = (Good)
Voltage reading and battery
condition descriptionfor the vehicle
battery
See also 3.7C
Less than 10.9 = (Poor)
10.9 to 11.8 = (Fair)
11.9 to 14.4 = (Good)
Indication of the 230V mains supply
ON = mains supply on
OFF = mains supply off
Shows the type of battery configured
within the EC325PSU
The leisure battery type can be
changed within the EC325PSU to
accommodate Gel batteries if
required (see section 3.7A for
details)
Water level in the fresh water tank
(5 measurement levels)
If the water pump power switch is
turned ON and the later level drops
below 25% a warning beep will be
heard and the LCD display will flash.
To cancel the warning, press the
select (
) button. The warning will
not be repeated unless the water
pump power switch is turned off and
on again. This is to ensure the
warning does not become a
nuisance.
0% < 1/4 Full (Nearly empty)
25% > = 1/4 Full
50% > = 1/2 Full
75% > = 3/4 Full
100% = Full