Fault
In the event of a fault, the Truma CP plus control panel immediately jumps to the
“Fault” menu level and displays the fault code of the fault. The cause of the fault
can be determined and remedied with the aid of the troubleshooting guide (from
page 59-61).
Cause eliminated / return to setting level
•
Tap the rotary push button.
•
The respective appliance is restarted.
If the cause has not been remedied, the fault will occur again and the control panel will
jump to the “Fault” menu level again.
Cause not eliminated / return to the setting level
•
Press the Back button.
E = Fault
112 = Fault code
H = Device
H = Heater
A = Air conditioning
system
hot
52
Harmony - Faults
Note:
This can take several minutes because of internal after-runs of connected appliances.
Note:
In this case, the warning in the Truma CP plus control panel has not been
acknowledged and the warning symbol remains. The appliance remains in fault state.
Other connected appliances can be operated.
