The lightning symbol is displayed when AC mains power is connected to the system.
The solar active symbol is displayed when enough current is being generated
by the solar panel to put charge into the battery (i.e. solar current greater than
100mA)
The frost warning symbol is displayed when the external temperature is below 2
oC
Your control panel will have an appearance as below, but depending on your vehicle
specification the control panel features will vary. Not all features are present in all vehicles
Power Button
– Pressing this button switches on power at the PSU and enables
the water pump(s) and lights to be switched on and off. When turned on the
button will be back lit blue. The power button can also automatically turn some
of the lights on when it is switched from off to on.
Pump Button
– Pressing this button switches the pumps on and off. When on
the button will be back lit blue.
Water Levels
– Pressing this button takes you to the water levels screen, allowing
you to view the water levels in the fresh and waste tanks.
Power Levels
– Pressing this button takes you to the power levels screen, allowing
you to view: battery voltages, active battery current, AC current and solar current.
Main Lights
– Pressing this button toggles the main lighting system on and off,
When on the button will be back lit blue.
Awning lights
– Pressing this button toggles the awning / entry lights on and off,
When on the button will be back lit blue.
Battery Select
– Pressing this button changes the source of battery power
between the vehicle battery and leisure battery. This will also prioritise charging
from the on board charger or solar panel depending on setting.
Settings
– Pressing this button takes you to the first settings screen (power
settings), from there the other settings screens can be accessed (power settings,
lighting settings, screen settings, time & date)
Screen Wake
– after a period of inactivity (the default time is five minutes) the screen will
power down and the back-light will switch off to help conserve power. Simply touch the
screen in any place to wake the screen. The screen time out time can be changed on the
screen settings screen (see page 14 for full details)
Top Bar
– the top bar displays the external temperature, relative humidity, internal
temperature, AC plugging status, solar charging status, and frost warning status. On other
screens humidity is replaced by the clock.
The Control Panel
Control Panel Operation
08
Harmony - The Control Panel
Harmony - The Control Panel
09
www.auto-sleepers.co.uk/harmony
External
Temperature
Date
Settings
Battery
Select
Main
Lights
Power
Button
Pump
Button
Awning
Lights
Relative
Humidity
Internal
Temperature
Frost
Warning
Solar
Charging
AC
Plugged
In
Clock
Water
Levels
Power
Levels
