16
16
--CHARGING CABLES--
>CONNECT THE SMALL
LEADS TO THE
BATTERY
'Y' TO CONTINUE
--MAIN MENU--
PM TEST
BATTERY TEST
BATTERY BANK TEST
>VDROP MENU
ALTERNAZTOR TEST
STARTER DRAW TEST
REVIEW/PRINT
--VDROP MENU--
>CHARGING CABLES
STARTER MAIN CABLES
MAG. CIRCUIT
LIFTGATE CHARGE
LIFTGATE MOTOR
LIFTGATE TRUCK CIR.
GENERIC VDROP
The individual charging voltage drop
test can also be selected from the
main menu
. . .followed by a selection of
Charging Cables.
You will be asked for the alternator rating and instructed to connect the large
clamps to the alternator as in the charging system test.
5
CHARGING SYSTEM VDROP TEST
Connect the small leads to the
battery bank - the red on the
positive main and the black
on the negative main and not
to an individual battery. The
added small external leads will
check the cables before the
alternator is tested. This is the
individual VDorp Test.
ALTERNATOR
HOOKUP
Red to Positive
Black to Ground
BATTERY
HOOKUP
Black Clamp
at Negative
Main
Red Clamp at Positive
Main
--MAIN MENU--
BATTERY TEST
BATTERY BANK TEST
VDROP MENU
ALTERNATOR TEST
STARTER DRAW TEST
REVIEW
>MULTIMETERS
+ 14.50V
.
--MULTIMETERS--
INT VOLTS: 14.00V
RIPPLE: 8.97mV
EXT VOLTS: 14.46V
POS DROP: 0.00V
NEG DROP: 0.00V
AMP PROVE: -2A
AC AMPS: 2.14A
Note:
The Amps are displayed only if the Amp Probe is connected.
The first display gives the internal
volts.
Press (Y Enter) and for the external
volts.
Press (Y Enter) again for an
extended menu results. Again, the
Amps are only displayed if the Amp
Probe is connected.
(INTERNAL VOLTS)
“Y” FOR NEXT METER
+ 14.49V.
(EXTERNAL VOLTS)
“Y” FOR NEXT METER
MULTIMETERS
Select MULTI METER from
the main menu and press
(Y Enter).
This gives the user a chance to compare the voltage from the large clamps and
the external leads.
33
33
