38
⑤
Function Buttons
The operations of all the available function buttons on Live Data screen are described
below:
Cancel All
—
cancels all selected parameter items.
Show selected/Show all
—
switches between the two options; one displays the
selected parameter items, the other displays all the available items.
Graph merge
—
merges selected data graphs (for Waveform Graph Mode only).
This function is very useful when making comparison between different parameters.
NOTE
This mode supports Graph Merge for 2 to 3 parameter items only, so select no less than
2 or no more than 3 items each time when making graph merge.
To cancel Graph Merge mode, tap the drop-down button on the right side of the
parameter name, and select a data display mode.
To top
—
moves a selected data item to the top of the list.
Setting
—
sets recording duration.
To set live data record duration
1. Tap
Setting
button at the bottom of the Live Data screen.
2. Tap the
>
button to the right of
Recording time after trigger
bar and select a
time length.
3. Tap
OK
to save the setting and return to the Live Data Setting screen; or tap
the X button at the upper right corner to exit without saving.
4. Tap
Done
at the upper right corner of the Live Data Setting screen to confirm
and save the setting, and return to the Live Data screen; or tap
Cancel
to exit
without saving.
Clear data
—
clears all previously retrieved parameter values at a cutting point
whenever you choose.
Freeze
—
displays the retrieved data in freeze mode.
Resume
—
exits the freeze data mode and return to normal data display.
Previous frame
—
moves to the previous frame in the freeze data.
Play/Pause
—
plays/pauses the frozen data.
Next frame
—
moves to the next frame in the freeze data.
Record
—
starts recording the live data of the selected data items. Tap the
Record
button at the bottom of the Live Data screen. A message will display
prompting user to select parameters to record. Tap
Got It
button to confirm. Scroll
Summary of Contents for OTOFIX D1 Pro
