Rear Entry:
IMPORTANT:
• Use copper conductors only with the wire size of 6 AWG (16 mm²)
.
• Ensure that the screws for the terminal blocks are properly tightened.
• Ensure that there is no copper wire or debris left inside of the charger before switching on the electrical power to
the charger.
1. Remove the rear entry power conduit plug from the charger and replace it with the 3/4” conduit fitting (F).
2. Insert the AC input cable into the conduit fitting and attach the conduit fitting to the charger.
3. Screw the nut into the conduit fitting.
1
8
Nut
Removing the NEMA Cable (Optional)
Power Supply Wiring
In case you need to replace the NEMA cable with a
Hardwire, remove the NEMA cable by unscrewing
the terminal screws per the diagram. Then loosen
the cable gland and pull down the NEMA cable.
F
