IMPORTANT:
Switch off all electrical power prior to installation.
Installing the Charger
2. Attach the wall dock to the mounting location by screwing
two M6 x 50 screws (B) into the lower mounting holes.
Tighten the screws using the screwdriver type PH2.
1. Find the wall stud nearest to the NEMA outlet using a wall stud finder.
Draw a vertical line of approximately 20" (50 cm) in line with the wall stud.
2. Plug the NEMA cable into the outlet, and position the charger centered
on the vertical line. Ensure that the NEMA cable has a slight curve and is
not stretched.
3. Mark a horizontal line at the bottom of the charger.
4. Unplug the charger.
3
1. Drill two 5/16" holes and insert two 5/16" diameter wall
plugs into the lower mounting holes.
DANGER: Risk of shock. Turn off the power to the outlet at the
circuit breaker until the installation is completed.
To find the ideal mounting height of the charger:
1
5
Place the wall dock with the bottom edge aligned with the horizontal line
and the center holes aligned with the vertical line. Mark the two lower
mounting holes (A) and remove the wall dock.
2
Wall
A
A
Wall
B
B
B
NEMA Plug-in Installation
