background image

INTEGRATED GUARD UNIT CENTRAL

 

 

 

 

 

17

User Guide 

The automatically generated codes follow a logic sequence: 

 

 

The two first digits correspond to the number of the building (SDL). 

 

The two digits in the middle indicate the plant. 

 

The two last digits represent the flat itself. 

 

Suitable codes of Telephone/Monitor and SDL are assigned to each of the 

automatically generated register. The codes of Telephone/Monitor are generated 
correlatively from “1”, and renew their account for each building (SDL). 

 
The Automatic Entry doesn't generate any content in the fields “Name” and “Flat 

Info”. After the process has finished, it is advisable entering to “Display/Edit” to review 
the generated codes and, if it is desired, edit the registers. When entering to 
“Display/Edit” option, the last generated code will be shown. 
 

4.4.1.3. Erase:

 

 

There are 2 kinds of erasure: 

 

 

Selected Register. 

 

Entire Directory. 

 

Selected Register:

 This option allows navigating through the directory and 

erasing the register shown on the screen. Before erasing the register, the SB will ask for 
confirmation to do it. 

 

Entire Directory:

 This way, all the registers in the directory are erased. In this 

process the switchboard also asks for confirmation before continuing. During the 
process a progress bar will be shown on the screen. 

 

4.4.2. Parameters: 

 

In this menu, the parameters that identify the SB, and those that describe the installation 

of the system, are configured. 

 

 

4.4.2.1. Switchboard:

 

 

The switchboard parameters are 3: 

 

 

ID. 

 

Status. 

 

Manager. 

 

ID:

 Number of identification of the switchboard. It can vary from 0 to 15. 

 

Status: 

It configures the SB as Master or Slave. The Master switchboard defines the 

operating mode of the installation. In other words, all the switchboards will work 
according to their own operating mode, but it is the Master switchboard the one that 
determines if the calls must directly be passed (Direct Mode) or never arrive to the flat 
(Not Disturb Mode). Anyway, if any switchboard takes care of a call and decides to 
make a consult or to pass it, it will be able to do it without any restriction. 

 

Summary of Contents for CENTRAL COMPACT INTEGRADA























Reviews: