INTEGRATED GUARD UNIT CENTRAL
15
User Guide
The first 3 fields are numerical and they are modified using the numerical keys of
the keypad.
Name
and
Flat Info
fields are textual fields, and they are modified with the
character set that appears on the screen during their edition. In order to move through
the character set, the keys of the navigator must be used. To leave the character set,
symbol (right bottom corner) must be selected.
To leave the edition of a register the left arrow
Å
key must be pressed, without any
field in edit mode.
4.4.1.2.
Add:
Registers can be added to the directory in 3 different ways:
•
Manual Entry.
•
Remote Entry.
•
Automatic Entry.
Manual Entry:
It creates a register with initial values and it shows it on the screen
to its edition, the way explained previously.
Remote Entry:
With this method the registers are loaded from a PC. This way, it is
possible to load complex directories really fast.
Before proceeding to load the database of the SB it is recommended to have it
completely empty, in order to avoid confusions between coincident codes. To erase the
directory see chapter 4.4.1.3.
To use the remote entry from PC it is necessary to have the auta connection kit.
This kit includes the software “auta Directory” and an interface for RS232 serial port.
Figure 8
. Auta Directory v1.0 software.
The interface should be connected for one side to a RS232 port (see figure 9). The
other side (plug) should be inserted into the connector CON3 placed in the module of
connections of the switchboard (see detail in figure 9).
Once the interface is correctly connected, the SB must be plugged to the module of
connections and then get into “
Remote Entry
”. At that moment, the SB will wait to
receive data.
