INTEGRATED GUARD UNIT CENTRAL
10
User Guide
3. Communication with another SB.
The SB allows keeping communication with other SB in a similar way that it does with
the flats.
3.1. Call to another SB:
It is possible to call to another SB in two different manners: by code or from the missing
calls queue.
Call by Code:
•
The
door-Release key (
³
)
of the SB must be pressed. Then it will appear the
“
Calling to Switchboard
” menu and the code of the last SB called, or of the last one
a call has been received from will be shown.
•
The switchboard which is being called is selected using the vertical arrows, to
increase
È
,
or decrease
Ç
the number of the SB (from 0 to 15). To exit this menu,
the door-release key (
³
) must be pressed.
•
To perform the call, pick up the handset and press
OK
. The call will be performed
in a similar way than if it was a call to a flat.
Call from Queue:
•
In the missing calls queue are also stored missing calls from other switchboards.
•
Once in the queue, navigate through the missing calls until find the call from the
switchboard.
•
To perform the call, just pick up the handset and press
OK
.
3.2. Call from another SB:
Any switchboard can receive calls from the rest, regardless its operating mode.
The switchboard manages this kind of calls in a similar manner that it does with the
other kinds of calls:
•
It identifies the switchboard which is calling.
•
If it doesn’t answer in the first 30 seconds, the call is queued.
•
Communication between both switchboards is established picking up the
handset.
