Functioning
- When the monitor receives a call from the outdoor panel, it starts ringing, the available function keys get lit
up and the screen turns on showing the picture of the person who has made the call.
- The call can be finished pressing CANCEL at any time.
- To get audio communication, press OK. You can switch between MUTE and TALK pressing OK during the
conversation.
- The conversation length is up to 1m 30s maximum.
- If the call is not attended, the monitor will return to stand by mode in 30 seconds.
- During the calling stage, it is possible to open the door with (
) at any time. Once this key is pressed, the
monitor returns to stand by mode in 12 seconds.
INCOMING CALL
STAND-BY
CANCEL
OK
MODE
OPEN
TALK
PANEL CALL
·When the monitor receives a call from a switchboard, everything works as in the panel case, unless that the ring
is monotone and the open-door option is not available. If the switchboard has a camera its picture will be
displayed on the monitor.
STAND-BY
CANCEL
OK
MODE
SWITCHBOARD
TALK
SWITCHBOARD CALL
When the monitor receives an intercommunication call, the ring is monotone and in the screen we'll see the
number of the monitor which is performing the call.
The call is finished with
CANCEL
and accepted with
OK
.
If during an intercom conversation a panel call is received, a message will be displayed indicating the calling
panel so the user can end the intercom and address the board with a self-starting if desired.
STAND-BY
CANCEL
OK
MODE
TALK
INTERCOM CALL
INTERCOM-1
Call to unit 2
CALLS FROM THE MONITOR
The video can be activated with any panel or 'smart' camera in the installation by pressing (
). It can be
done even in the conversation stage.
The video communication lasts 30 seconds. To set an audio communication, which will last a maximum of 1m
30s, press OK.
During the self-starting the video panel / camera can be changed by pressing (
). Also the door opener
(
) can be triggered at any time. Once pressed, the monitor ends the conversation in 12s.
SEQUENTIAL SELF-STARTING
STAND-BY
CANCEL
OK
MODE
OPEN
TALK
AUTO
If there is a Switchboard in the installation, it is possible to establish an audio communication with it, pressing
OK
+ (
) with the monitor in stand by mode. The conversation length is up to 1m 30s maximum.
STAND-BY
CANCEL
OK
MODE
Call to switchboard
TALK
SWITCHBOARD CALL
Note: When the monitor is in stand by mode, pressing OK key will activate the monitor.
Intercom Avant Monitor
