1º-
Fix the frame to the mounting box with the provided screws. The frame allows adjusting little deviations of the mounting box.
2º-
Remove the terminal blocks of the monitor and proceed with the wiring.
3º-
Configure the monitor and plug the terminal blocks again to the monitor. (see page 2)
4º-
Insert the monitor into the frame.
BUILT-IN
SURFACE
UPPER FIXING POINTS
LOWER FIXING POINTS
1º- Fix the iron sheet to the wall with the provided screws. The iron sheet allows adjusting little deviations.
2º - Remove the terminal blocks of the monitor and proceed with the wiring.
3º- Configure the monitor and plug the terminal blocks again to the monitor. (see page 2)
4º- Hang the monitor in the iron sheet fixed in the wall.
Note:
When the monitor is placed into the
frame, if you feel it is not firmly fixed,
bend slightly the fixing points of the frame
to increase the fastening.
MONITOR FIXING POINTS
FIXING THE
TO THE WALL
MONITOR
installation
Intercom Avant Monitor
179mm
15
1mm
35mm
