Austro Flamm Polly light, User Instructions, Page: 44 / 68

english
42
Polly
3 Outer dimensions and technical data
Nominal thermal output (NWL) 8 kW
Partial-load thermal output 2.4 kW
Space heating capacity 55 – 190 m³
Degree of efficiency > 90%
CO content at NWL <180 mg/Nm³
CO content at partial-load 155 mg/Nm³
Flue gas temperature at NWL 150 °C
Flue gas mass flow rate at NWL 4.4 g/s
Flue gas mass flow rate at partial-load 3.2 g/s
Holding capacity, full tank 26 kg / 40 l
Fuel Pellets
Pellet consumption min./max 0.6 – 1.8 kg/h
Autonomy min./max approx. 12 - 40 h
Air connector Ø 80 mm
Flue connector Ø 100 mm
Current upon switching on 300 W
Operating current 50 W
Voltage / current frequency 230 V / 50 Hz
Voltage fluctuations 0.9 - 1.1 of the rated voltage
Frequency fluctuations 0.99 - 1.01 of the rated frequency, constant
0.98 - 1.02 short-term
Dimensions H x W x T 1100 x 526 x 498 mm
Weight 150 kg
Minimum spacing side 150 mm
rear 100 mm
front 800 mm
Temperature limits 0 - 40°C
Relative humidity non-condensing
Installation location above sea level < 1000 m
englisch