AUSTINDRIVE Assembly Tutorial Rev 3.02
December, 2020
31
Bend all resistors and diodes so that they fit into the sockets,
and cut-off the legs. Needle-nose pliers and magnification
can help when installing these components into the sockets.
IMPORTANT NOTE:
IN400x diodes are black with a silver stripe on one end. They can be 1N4001, 1N4004, or
1N4007 diodes, and may vary between kits. The only difference is the voltage rating, which
does not matter in this part of the circuit.
The 1N400x diodes have slightly larger-diameter legs than the other components.
1N400x legs bend-open the socket connections in rows A, B, C, D, E, F, G & H.
When removing a 1N400x, the socket
may stay bent-open. Components
with smaller legs may not fit tightly
into those sockets unless the sockets
are bent back using a toothpick.
(I am working on a better solution
than this, but a toothpick works for
now.)
Summary of Contents for AUSTINDRIVE
Page 1: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 1 AUSTINDRIVE PEDAL DIY PROJECTS ...
Page 6: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 6 Theory of Operation 4 ...
Page 32: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 32 x x 4001 4001 ...
Page 33: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 33 4001 4001 ...
