AUSTINDRIVE Assembly Tutorial Rev 3.02
December, 2020
24
Secure the potentiometers with a little nail polish
on the threads and nut.
Avoid getting nail polish down the barrel of the
potentiometer shaft!! (The part that turns.)
Install the LED
into the enclosure
from the
outside.
Pass the wires through the
enclosure from the outside, and press in.
NOTE:
For kits
with
a DRIVE knob, the LED
goes in the
center
hole.
We will solder the LED wires later.
If you
don’t
have a drive knob,
the LED goes in the other hole.
Check-Off
Summary of Contents for AUSTINDRIVE
Page 1: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 1 AUSTINDRIVE PEDAL DIY PROJECTS ...
Page 6: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 6 Theory of Operation 4 ...
Page 32: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 32 x x 4001 4001 ...
Page 33: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 33 4001 4001 ...
