AUSTINDRIVE Assembly Tutorial Rev 3.02
December, 2020
23
Install the DC Jack
Install the Volume Pot
into the
enclosure. This is a B250k Pot.
•
Red wire to switch Pin 3
(Next to the
Green
wire)
Route the red wire
over
the input jack,
against the wall of the enclosure.
NOTE:
The potentiometers have a small indexing tab
which must be broken-off or cut-off before installation.
This tab snaps-off when bent with pliers, or use a pair
of diagonal cutters (shown) to remove this small tab.
Marking
each pot with “V” for volume and “D” for
Drive helps with orientation.
Check-Off
Summary of Contents for AUSTINDRIVE
Page 1: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 1 AUSTINDRIVE PEDAL DIY PROJECTS ...
Page 6: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 6 Theory of Operation 4 ...
Page 32: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 32 x x 4001 4001 ...
Page 33: ...AUSTINDRIVE Assembly Tutorial Rev 3 02 December 2020 33 4001 4001 ...
