14
STEP 16 - Insert Drip Cup
•Insert drip cup into hanger clip underneath grill bowl.
Step 17 - Attach LP Cylinder
Drip Cup
1.
Loosen wing
bolts on cylinder
slide lock.
Raise to highest
position and
retighten.
2.
Place cylinder on cylinder
support and hold in place.
Orient cylinder with open
side of collar under the grill
as shown. Notice not all
cylinders look alike.
3.
Lower the cylinder slide
lock onto collar of cylinder
and tighten wing bolts.
•Make sure bottom of
cylinder sits in notches on
cylinder support. This
helps prevent cylinder
movement.
4.
Remove the protective cap from
the cylinder valve. Align regulator
with cylinder valve. Make sure
regulator hose is not near or con-
tacting any hot surfaces.
5.
Insert nipple of regulator into the
cylinder nozzle opening. Hand
tighten coupling nut in clockwise
direction.
Do not use tools.
Note: Turn all control knobs and LP cylinder valve to the “Off” position.
Please complete your leak test and you are now ready to use your grill!
