Installation Procedure
FOR C600G and CS900
1. Put the canopy on the wall over the cooker, and mark the height position where the distance from the
bottom of the canopy to the top edge of the cooker is at least 650mm. (See Figure 1)
Figure 1
Figure 2 (C600G)
2. Mark the hole positions on the wall and install wallmates and screws. (See Figure 2 & 3)
3. Hang the canopy on the wall and tighten the screws.
For CS600 model — Tighten the lower screws to secure the canopy. If the canopy seems acclivitous, use
the adjustable screws to adjust it to level. (See Figure 4)
Figure 3 (CS600)
Figure 4
4. Insert the exhaust pipe onto the outlet of the canopy. (See Figure 5)
5. Install the duct brackets onto the inner duct cover. (See Figure 6)
Figure 5
Figure 6
