41
REMOTE INSTRUCTIONS
RF REMOTE CONTROL
The RF handset is a remote control based on RF transmission,
specifically designed to operate in combination with a specific RF
receiver module.
NOTE: when placing the RF receiver module, it is recommended to
straighten the antenna as much as possible by keeping it as far from
metallic surfaces
INTRODUCTION
The purpose of this manual is to provide the information you need to install and use this product properly and
safely. This information is the outcome of ongoing, systematic data processing and technical tests recorded
and validated by the Manufacturer, in compliance with its in-house information quality and safety procedures.
The contents of this manual are intended exclusively for skilled , informed and trained users, capable of
operating in conditions that are safe for people, the system and the environment, and fully compliant with the
requirements discussed in the following pages and in current occupational health and safety legislation.
The information concerning assembly/installation, servicing, replacement and repair is intended for
authorized and skilled technicians, who are always the only people allowed to carry out said activities.
For the proper handling of the system, it is essential to ensure the readability and proper preservation of this
manual, also for future reference. Contact the Manufacturer directly in the event of its deterioration, or to ask
for any further technical and operational information you may need.
The text, descriptions, images, images, examples and all other details contained in this document are the
exclusive property of the Manufacturer. All rights reserved
Note: The button (6) moves between SLEEP and PROGRAM and with a third pressure on the button return
Temperature sensor location.
LCD display
Power Button. On, Off or place remote in Standby (Pilot) mode.
The mode select (Manual—Thermostatic) button switches the remote from manual (MAN) mode to
Thermostatic (AUTO) mode. When using this button in conjunction with other buttons you can also access
menus like the clock setting menu.
Use the up and down button for adjusting the flame level and adjusting the sleep and timer settings.
MENU button for accessing sleep and program menus.
Base and Battery compartment.
RF Control Panel Keyboard
Ref.
Icon
Description
3
ON-OFF/PILOT
4
MANUAL-AUTOMATIC mode
5
Increase
5’
Decrease
6
SLEEP-PROGRAM mode (*)
Keyboard lock-release (**)
