Aurora Multimedia DIDO Jr., Installation Manual

Page: 9 / 46

DIDO Jr. Installation Manual
8
For details of DIDO Jr. operation, refer to the corresponding chapter of this document.
Below is a brief description of the remote transmitter and the keys used for DIDO Jr. control.
IR Remote Function
POWER Toggles Power On and Off
ZOOM Brings up Zoom selection for each window 0-100%
CROP Brings up Crop selection for each window 0-100%
POS Brings up Position selection for each window 0-100%
SIZE Brings up Size selection for each window 0-100%
Increases Volume level
VOLUME -
Decreases Volume level
MUTE
Toggles the volume Mute On/Off
ARROWS Moves the cursor up/down/left/right when Menu is active
MENU Displays Main Menu
SEL Selects option in Menu
Finishes input in dialog panels
EXIT Exits 1 menu level
0..9, DIGITS Enters digits when dialog menu is active.
INFO
Displays current input/output timings and FW version
ROTATE
Rotates output image by 0, 90, 180, 270 degrees
DVI A
Selects DVI Side A Input
RGB A Selects RGB/YPbPr Input
VIDEO A Selects Video/S-Video Input
DVI B Not Available for DIDO Jr.
RGB B Not Available for DIDO Jr.
VIDEO B Not Available for DIDO Jr.
SINGLE Selects 1 window on the output
DUAL Selects 2 windows on the output
TRI Not Available for DIDO Jr.
QUAD
Not Available for DIDO Jr.
SWAP
Swaps the sources between the windows
FREEZE Freezes the current window
PRESET KEYS P1 – P4 selects the stored preset
4 Quick Start Guide
1. Make sure the DIDO Jr. and the Display are both disconnected from power.
2. Connect the DIDO Jr. to the Display’s DVI, VGA, or YPbPr port as required.
3. Connect the appropriate video sources to input connectors of DIDO Jr. (see “Connections”
chapter for details).
4. Connect audio input/output to the 8-pin mini-DIN connector of the DIDO Jr. (see “Connections”
chapter for details).
5. Connect the power source to the Display (refer to Operating Instructions of the Display).
6.
Connect the supplied 12v DC adapter to the DIDO Jr. and the power outlet. The LCD will light
and after 5 seconds, the firmware rev will appear. About 15 seconds later, the DIDO Jr. will
complete initialization and display the output resolution and format on the LCD. The last
settings of the DIDO Jr. will take effect.