Aurora Multimedia DIDO Jr., Installation Manual

Page: 13 / 46

DIDO Jr. Installation Manual
12
7 Operating the DIDO Jr.
The DIDO Jr. has many advanced features to enhance the typical viewing experience. A user can switch
the unit on or off, control volume level, switch the current source, rotate an image, and many other
functions.
Advanced functionalities may differ in some of the operating modes, which will be described in more
details and in the subsequent chapters of this document.
7.1 Remote Control Functions
Key: Vol+/-
Increases or decreases the volume level.
Keys: 0-9
Used for direct number entry for menu items such as presets, zoom, size, position, etc.
Key: Menu
Displays the Main Menu (see the Menu System chapter).
Key: Sel
Enters selections / confirms changes in the menu.
Key: Exit
Exits one level in the menu or turns off OSD that’s being displayed.
Key: Power
Toggles the power on/off.
Key: Rotate
Rotates output image by 0, 90, 180, and 270 degrees.
Key: Swap
Swaps input sources between window 1 and window 2 when the DIDO Jr. is in PiP or SBS mode.
Keys: Info
Displays current sources, input / output timing information, and FW version via OSD. This information
will be displayed for 5 seconds.
Key: Freeze
When pressed, it stills the current image on the screen. Pressing again will resume motion.
Keys: Zoom, Crop, Pos, Size
When pressed, it will bring up a menu to select the window to be adjusted. All these selections have a
range of 0-100 percent with tenths of a percent accuracy for a total of 1000 points of precision adjusting.
•
Zoom: enlarges or shrinks the output image.
•
Crop: is specific to an input and is used when under scanning an image to remove unwanted
areas around the border. It helps balance the inputs with each other.
•
Size: is used to separately adjust of the horizontal and vertical size of an output image.