DIDO Jr. Installation Manual
35
General Info:
After each command you need to wait for the following answer "~<ADDR> OK <string><CR>" before
sending the next RS-232 command. Some commands require time to carry out the function assigned. If
another command is sent before the DIDO Jr. can complete the first task it may ignore the next function.
Always allow the DIDO Jr. the proper time to finish the command. Commands which take the longest
would be Preset Load and Save and Source changes.
Invalid commands will reply with ~ERROR<CR> as long as the address is zero.
Convert the multi-digit ASCII decimal representation response to a true hexadecimal value. Ex. xx = 13
(0x31, 0x33) turn this into 0D. The bit information is once the ASCII to hexadecimal conversion has
been done.
Summary of Contents for DIDO Jr.
Page 12: ...DIDO Jr Installation Manual 11...
Page 45: ...DIDO Jr Installation Manual 44...