~ 5 ~
ASP-88
Front Panel
1.
Power:
power on/off switch
2.
PREVIEW Button:
press
PREVIEW
to watch input/output mapping. This function is active
when the button is bright
3.
INPUT Buttons:
press respective button to select input port 1 to 8
4.
OUTPUT Buttons:
press respective button to select output 1 to 8
5.
EDID Button:
press
EDID
button to enter EDID operation (for more detail please see EDID
Learning section in page 15). This function is active when the button is bright
6.
PRESETS Buttons:
Save the current input/output mapping to presets or load one of the
preset input/output mappings to current configuration by pressing
SAVE
or
LOAD
button respectively
7.
IR:
infrared sensor to receive any IR commands from the IR remote control
8.
EXT IR Receiver:
plug in an IR receiver here to receive any IR commands from the IR remote
control
Panel Descriptions
1
2
4
5
6
7 8
3
