~ 18 ~
Method 2: Manually connect HDMI displays to HDMI input ports
1.
Power up the matrix. Connect the HDMI display that its EDID needs to be learned to any of
the HDMI
INPUT1-INPUT8
port where your source device has trouble to show the picture
normally.
2.
To learn the display’s EDID for source device
connected to respective HDMI
INPUT1
-
INPUT8
port, pull both pins of respective DIP switch
SW1-SW8
up-and-down to stay at
ON[
Æ
]-ON[
Æ
] and wait for about 5 seconds to complete the EDID learning process. You
DON’T NEED to pull up the DIP switch again unless you want to learn another display’s EDID
by pulling both DIP switch pin-1 & pin-2 of
SW1-SW8
up-and-down one more time.
3.
Repeat step1 & step2 if you want to learn the EDID of this HDMI display on any other HDMI
input ports that have same trouble playing the audio/video properly.
