16 GB/IE
Removing Segments (Fig. D)
Note:
The segments which can be removed are marked with an
arrow (see Fig. D). They are connected together with pins. These can
be pushed out in the direction of the arrow with the repair set
8
. Use
a pair of tweezers if necessary in order to remove the pins.
Place the watch with the dial facing downwards in the repair set
8
.
Remove the pins of the segment that you wish to remove (as
described above) and take out the segment
7
.
Note:
If you would like to take out more than one consecutive
segment
7
, it is sufficient to remove the two outer pins.
Connect the watch strap together again by joining the loose
segments
7
with a pin. Press this pin against the direction of the
arrow into the adjacent segments
7
.
How to exchange the pin inside the slider
(Fig. E,F,G)
Take out the slider
9
, open the bottom cover
11
with the spare
pin
10
inside.
You will need the pliers to carefully remove the old pin from the