![background image](http://html.mh-extra.com/html/clas-ohlson/yp04250/yp04250_instruction-manual_2617930001.webp)
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk and click on customer service. Internet: www.clasohlson.co.uk
Ver
. 00
1-200
708
Wristwatch Digital
Art.no. 31-4143 • Model: YP04250
Please read the entire instruction manual before using and save it
for future use.
Product Description
Digital wristwatch with alarm, date, stopwatch with lap-times,
countdown timer, double time zones and multi coloured background
light. Water resistant 100 m.
Buttons
a. RESET button
b. MODE-button
c. Button for background light
d. Start/stop button
Display
Use
Set time
1. When the watch displays
time press and hold RESET
until the seconds indicator
starts to blink.
2. Press start/stop to reset the seconds display.
3. Press MODE to switch to
the next setting mode.
4. Press start/stop repeatedly to gradually
increase the digits. Hold in the button to
increase the digits quickly.
5. Repeat step 3 and 4 to make all settings. The frequency on the
settings are: Seconds – Hours – Minutes- Year – Month – Date.
6. Push RESET when you have made your settings. The day of
the week is automatically set when the year, month and date is
set.
Switch between 12 and 24 hour display
When the watch displays time press RESET to
switch between 12 and 24 hour display. PM is
shown on the display in the 12 hour display mode
and 24H in the 24 hour display mode.
Show date
When the watch displays time press and hold
Start/Stop to display date and year.
Alarm with hourly signal
When the alarm is activated the signal will sound every day at the
set time. You shut it off by pressing any button. Otherwise the alarm
will sound for about 60 secs. When the hourly signal is activated
the watch will sound every hour on the hour.
Set the time for the alarm
1. When the watch displays time press MODE
repeatedly to get to the alarm mode. Press
RESET once. The alarm symbol is shown on
display and the hours start blinking.
2. Press start/stop repeatedly to gradually
increase the digits. Hold in the button to
increase the digits quickly.
3. Press MODE to switch to
the next setting mode.
4. Press start/stop repeatedly to gradually
increase the digits. Hold in the button to
increase the digits quickly.
5. Press RESET when you have made your settings to save
them. Press MODE repeatedly to return to the normal time
display.
Activating the alarm and hourly signal
- When the watch displays time press MODE
repeatedly to get to the alarm mode. Press
start/stop once. The alarm symbol is shown
on the display.
- Press Start/Stop repeatedly to activate the
hour signal or alarm and the hour signal
combined.
The alarm and hourly signal can be combined in the following way:
- Only the alarm (alarm symbol will show on display).
- Only the hour signal (the symbol for hour signal is shown on
display)
- Both alarm and hour signal (both symbols are shown on display
at the same time)
Stopwatch
Without Split time
1. Press MODE repeatedly to get to the
stopwatch.
2. Press start/stop button to
set the stopwatch.
3. Stop the stopwatch by
pressing Start/Stop again.
4. Press RESET to reset the stopwatch to zero.
Functions
Press MODE repeatedly to change functions. The sequence
is: Time, alarm, stopwatch, countdown function (timer), time for
different time zone.
a) Time
- 12/24 hour display
- Displays hours,minutes, seconds,
weekday and date.
- 50 year calendar (2000 – 2049)
b) Alarm
-The alarm will sound every day at the set time.
c) Stopwatch
- Accuracy 1/100 seconds.
- Timer range: 00:00:00 –
23:59:99
d) Countdown Timer
- Countdown time: 23:59:99 – 00:00:00
e) Double time zones
– Displays time for two time
zones.
Week days
Date
Alarm
Hour signal
Seconds
Minutes
Hours