Rev. C 04/08
01030
7
CONDITIONING WATER TANK
Conditioning the water tank ensures that the cooling
system will operate at optimal levels throughout the life
of the system. It is suggested that the tank be
conditioned at an interval of every 4th filling or
once/month; whichever comes first.
•
Completely drain water tank. (See Emptying Water
Tank)
•
Fill tank with DRINKING WATER. Be sure to always
fill tank with basket filter in place.
•
Add ½ teaspoon of unscented chlorine bleach to the
water tank (approximately 5 drops per gallon of drinking
water).
•
Replace cap and hand tighten.
•
Run system for 5 minutes with a WET mist.
•
The system is conditioned and ready for operation.
REPLACING FILTERS
The filters have been designed to provide optimal
system performance by catching any debris that may
enter the supply lines throughout use. Semi annual
replacement of both the air and water filters ensures the
life of your system.
•
Remove the ventilation grill and locate the air and
water filters (J-1, J-2).
J-1
Ventilation
Grill
Air Filter
Water Filter
Ventilation
Grill
Air Filter
Water Filter
J-2
•
The filters are connected to the system via “Push-In”
connectors for ease of service. Push the connector and
pull the hose (J-3).
Air filter
Air filter
Water
Filter
Push-In
Connector
Water
Filter
Water
Filter
Push-In
Connector
J-3
•
Dispose of filter.
CAUTION:
IMPROPER PLACEMENT OF
THE FILTER CAN DEGRADE SYSTEM
PERFORMANCE.
•
Remove filter from package and orient the directional
arrow so that the flow direction is towards the left J-4.
Water
Filter
Water
Filter
Water
Filter
J-4
•
Push the hose into the push-in connector to connect
the filters
•
Reinstall ventilation grill.
•
Any other servicing of this unit, except for general
maintenance described in this section, should be
performed by an authorized service representative.
STORAGE
1. Empty water tank completely, replace cap, and run
system to evacuate all water in supply lines.
2. Clean debris from ventilation grill area on front of
power unit.
CAUTION:
DO NOT USE GASOLINE, THINNER,
ALCOHOL, SOLVENTS OR OTHER HARSH
CLEANNERS, SINCE THEY WILL DAMAGE THE
MISTING FAN.
3. Clean the unit with a soft cloth and mild soap
solution. Dry all parts completely. Store the fan in a
clean and dry place.
