Installation Manual
AFADI01R-CH *** Faucet
Dimensions of fixtures are approximate and may vary ± 6mm (1/4”). Structure measurements must be verified against the unit to ensure proper fit.
Product images and specifications are for illustrative purposes only, product design may vary.
4
Unscrew the
Bottom Tube (8)
and remove the
Brass Hexagonal Nut (6)
, and the
Plastic Washer
(5)
.
Insert the top body of the drain:
Pop-Up Drain (1),
Drain (2)
,
Curved Rubber Washer (3)
into the hole
of the sink.
Reinsert the
Curved Rubber Washer (4)
and the
Brass Hexagonal Nut (6)
below the sink.
Tighten firmly without putting pressure on the sink.
Screw the
Bottom Tube (8)
back on.
2A.
(2)
(5)
(6)
(8)
(7)
Top Body
(3)
(1)
(4)
Sink Drain Hole
2A.
(1)
(2)
(3)
(4)
(5)
(2)
(3)
(4)
(5)
Hot In
Cold In
Drain Installation
Faucet Installation
1B.
1C.
1A.
(1)
(2)
(3)
(4)
(5)
(6)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Faucet
Chrome Base
Rubber Washer
Metal Washer
Plastic Nut
Flex Hose
Pop-Up Drain
Drain
Curved Rubber Washer
Bowl Rubber Washer
Plastic Washer
Brass Hexagonal Nut
Rubber Washer
Bottom Tube
(1)
Flex Hoses
(6)
Mounting Kit
Faucet
ATTENTION!
TIGHTEN HOSES BY HAND ONLY
Remove the mounting kit below the
Faucet (1)
If Not already attached, attach both flex hoses to
the faucet (hand tighten only).
Insert
Flex Hoses (6)
through the hole of your sink
or countertop, then place the faucet inserting the
threaded end in your sink or countertop.
Insert the
Rubber Washer (2)
, the
Metal Washer
(3)
and secure the
Faucet (1)
with the
Plastic Nut
(5)
.
Connect the hot and water hoses to the inlet shut
off valves.
1A.
1B.
1C.
