AUO PS42A, User Manual

Page: 33 / 74

OSD (On-Screen-Display) Controls | 31
SETUP
SETUP FUNCTION
Scheduler Changes the Scheduler setting.
• Before setting the " Scheduler ", be sure to set the current date
and time with "Date/Time settings".
• In order to activate the schedule function, please first enable the
scheduler on the menu.
• When the scheduler function is enabled, the sleep timer will not
work.
• A total of 7 schedules is allowed.
Signal Check Priority • Sets Priority 1 to Priority 4 (Priority 1: highest priority) as the
priority of each signal. When the current source signal is lost, the
display attempts to find a new signal source according to the
Signal Check Priority setting.
• When the signal source for which Priority 1 is set is not found,
the display checks other sources in order of priority and switches
to the available source with the highest priority.
• When the signal source with the highest priority recovers, the
display automatically switches to the source again.
• When Signal Check Priority is disabled, the display uses the
last used source at power on.
Control Setting Allows the display to be controlled remotely via RS232 or LAN.
Ethernet Setting Adjusts the Ethernet Setting for the display. Select DHCP or Static.
If Static is selected, enter the IP, Mask, Gateway, and DNS
addresses.
Sleep Timer Sets the Sleep Timer to 5 , 15 , 30 , 60 , 90 , 120 , 180 minutes or Off .
• When the sleep timer function is enabled, the scheduler function
will not work.
Power Save Sets the Power Save setting to Off or from 30 sec to 300 sec (30
seconds per interval).
S c h e d u l e r
S i g n a l C h e c k P r i o r i t y
C o n t r o l S e t t i n g
E t h e r n e t S e t t i n g
S l e e p T i m e r
P o w e r S a v e
E q u a l i z e r
V G A S e t t i n g
R e s t o r e D e f a u l t
O f f
L A N
O f f
O f f
A u t o m a t i c
S e t u p
OK
OK
Menu
Exit
Menu
Return
Move