Controlling the Display Remotely |
43
Controlling the Display Remotely
RS232/LAN Connections
LAN Remote Control
LAN port (RJ-45) is equipped as standard on this equipment. Connect the LAN cable
(commercially available) to setup LAN settings. When using this machine in a LAN environment, it
is necessary to set an IP address on this machine.
LAN Connection:
To connect the display and a computer in network through a LAN hub.
1. Turn off the main power switch of the computer and the display. If you make a connection while
the power is on, it the devices may fail.
2. Using a straight-type LAN cable, connect the computer to the LAN hub.
3. Using a straight-type LAN cable, connect the LAN hub to the
LAN
connector of the display.
4. Power on the display. Open the OSD Menu and select Setup >
Control Setting
>
LAN
.
NOTE
When you use a cross-type LAN cable, you can connect the display and the computer one-to-
one without using a LAN hub, however, the computer may not be supported. It is recommended
to check the operation in advance.
Summary of Contents for PS42A
Page 1: ...Stretched Display User Manual PS42A PS42B...
Page 2: ......
