auna 10040148, Instruction Manual

Page: 37 / 116

37
EN
5. Raise the tone arm to the desired position on the record.
6. Adjust the volume to the desired level.
7. At the end of the record, the turntable automatically stops spinning. Lift
the tone arm from the record and place it back in the rest position.
8. To manually stop, lift the tone arm from the record and place it in the
rest position.
CD MODE
Insert CD
1. Press the CD button.
2. Press the open / close button to open the CDdoor.
3. Insert a CD with the printed side up in the compartment.
4. Press the button or DISC-CH to rotate the CD tray and insert the
other CDs.
5. Press the open / close button to close the CD door.
6. The CD search starts and the display shows the total number of tracks
on the current CD.
Note on CD playback
• When track 1-100 is selected for playback, the track number flashes
while the playback time is shown in the display during playback.
• If a CD contains more than 100 tracks and a track higher than 100 is
selected for playback, the track number flashes during playback while
the playback time flashes in pause mode.
Stop title
If the STOP button is pressed during playback or in pause mode, playback is
cancelled.
Skip forward and back within the CD
• If you press the button during playback or in pause mode, the unit
skips to the next track, displays the track number and then remains in
playback or pause mode.
• If the button is pressed during play or pause, the unit skips to the
previous track, displays the track number, and then stays in play or
pause mode.