12
Installation
For table top use
Inset the stand to the main unit and
speaker box refer to the picture
For wall mounting
• Detach the speakers and the stand.
• Use the drill template supplied with the unit to make marks on the wall.
• Drill 1/4” holes on the marks.
• Insert the plastic anchor supplied with unit it is flush with the wall.
• Insert the screw and tighten the screw 4mm away from the wall. Hang the main unit and speakers
to the screw as indicated below:
Connection
• Connect the DC plug (28) to the DC in jack (24) of the unit then plug the AC/DC adaptor (27) to
the AC outlet.
• When you first plug the unit into the mains, the unit will go into standby mode and the standby
LED indicator (7) will light up.
• Connect the speaker wire to the speaker jack (26) located on the side of unit.
• Turn on the unit by on/standard button (5), if the LCD display (12) is on with backlighting, it
means the power supply is normal. Now your system is ready to play the music.
