13
Setting the clock
• Set unit in standby mode.
• Press the “Mem/clk-adj” button (13), the “24Hour” will flash on LCD display (12), press the Skip
down
(21) or Skip up
(15) button to set the clock format(12 or 24hr).
• Press the “Mem/clk-adj” button (13), the hour digit will flash on LCD display (12) Press the Skip
down
(21) or Skip up
(15) button to set the correct hour. Press the “Mem/clk-adj” button
(13) to store the hour then minute digit will flash.
• Press the Skip down
(21) or Skip up
(15) button to set the correct minutes.
• Press ”Mem/clk-adj” button (13) to store the correct hour.
The pre-set time will be reset completely when disconnecting the main power supply.
We recommended switching the system into standby mode for convenient usage.
FM and DAB
Manual tuning
• Turn on the unit by On/Standby button (7) & then press the Function button (14) to select “ FM”
mode.
• Press the Skip down
(21) or Skip up
(15) button to tune your desired station.
• Adjust volume up/down button (10/4) for the desired volume level.
Auto tuning
• Set the unit to FM mode.
• Press and hold the Skip down
(21) or Skip up
(15) button unit will start to scan until radio
station received. If the radio data system (RDS) broadcasting signal received, the unit will set the
actual time automatically.
• Adjust volume knob (4/10) for the desired volume level
FM & FM-stereo reception
• The unit will default the FM mode at auto status. Thus, if FM stereo signal received then will get
the stereo sound automatically. When stereo signals are weak and noisy. It is preferable to change
the FM mode to mono by enter button (18).
• Check the FM receiving mode by press enter button (18).
Hints for best reception:
The receiver has a build-in FM wire antenna (23). Extended the rod antenna to-
tally and rotate to proper angle for the best reception.
Radio data system (RDS):
This is the features to display the information which released from the radio
broadcast and will showed on LCD display step by step as below by pressing the Play mode/Info (20)
continuously. Radio text
program type
signal strength
frequency
mono/stereo
Digital audio broadcasting (DAB) radio:
• Set the unit to DAB mode by press Function button (5).
• The system will scan full range automatically or press the Play/pause
/Scan button (22) once,
unit will start to full scan from range 11b-12d one time. Press Skip down
(21) or Skip up
(15)
button to select your desired DAB channel.
• Press the Play mode/Info button (20 continuously to check the below info released by DAB.
Group name
frequency
transfer rate
signal strength
scrolling text
program type
• Adjust volume knob (4/10) for the desired volume level.
