14
Preset stations
(You can store up to total of 40 radio stations in the memory (20-FM/20-DAB)
• Set to FM/DAB mode
• Turn to the desired radio station by manual or auto tuning method.
• Press and hold the Mem/Clk-Adj button (13) to enable memory state.
• Press Pre-up button (14) to select the desired station memory for storage.
• Press Mem/Clk-Adj button (13) again to confirm the setting.
• Repeat step 2 to 5 to store other stations.
To recall saved stations:
• Press the Mem/Clk-Adj button (13) once to enable recall state
• Press Pre-up button (14) to select the desired memory station.
• Press Enter button (18) to confirm the recall memory station.
System reset
If the unit out of control after wrong operation or would like to erase all the preset station simply, you
can reset the system as below step.
• Press and hold the Play mode/Info button (20) few second, LCD display (12) will appear “Press
Enter key to Reset”.
• Press the Enter button (18) to confirm reset then the unit will start to reset and all the information
will be erased.
CD Player
• Press function button (6) to select CD mode,
• Press CD door open/close button (19) to open the CD door.
• Place a CD with the printed side facing up inside the tray & then close the CD door
• While focus search is performing, the LCD display (12) will show the total number of tracks & total
playing time. Then, the unit will start to automatically.
• Adjust volume up/down button (4/10) to the desired volume level.
• Use the buttons
and
to play / pause / stop the music and use
and
to skip tracks or fast
fwd / rewind tracks.
• Repeat/Random
Press Play/Mode (20) repeatedly to switch through modes Repeat1 (repeats recent track), Repeat
All (repeats whole CD), Repeat Folder (only in MP3 mode: repeats the folder) and Random (random
mode).
• Playlist/Programming
Up to 20 tracks can be programmed for disc to play in any order. Before use, be sure to press
(18).
• Set cd mode and stop the cd playback.
• Press Mem/Clk-Adj (13) and “Mem” will appear on the display.
• Select a desired track by pressing
or
.
• Press Mem/Clk-Adj ” button (13) to store the track into memory.
• Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
• When all the desired tracks have been programmed, press
(17) to play the disc in assigned
order.
• Press
(18) to clear all stored memory.
Note:
The programming mode will automatically stop if no button is being pressed in a period of about
10 seconds after pressing the “mem/clk-adj ” button.
