Assembly Instruction
KS2 / KS2 T
WIN
Top hung / projecting top-hung
casement - outward opening
Bottom-hung casement
inward opening
I
NSTALLATION
STEP
8
B
:
C
ONCEALING
THE
DRIVE
06
230V
24V
short side
short side
Determine fastenings.
Produce drill holes with appropriate cross-section.
For the mounting dimensions please refer to the
above-mentioned hole layout drawings (see chapter
„I
NSTALLATION
STEPE
8
A
).
Align the cover
profi le
on the profi le brackets
proportionally and centrally and fi t.
Attach end caps
and with screw M3
fasten.
Screw on profi le brackets
.
Number of profi le brackets
depends on the length of
the cover profi le
: < 2 m length = 2 pieces
> 2 m length = 3 - 4 pieces
Determine length of cover profi le
:
Length cover profi le
= total distance between the
profi le brackets
(outer edge) + 4 mm.
Use a saw to shorten the cover profi le
to the required
length.
Deburr saw cut edge.
Carefully clear away drilling swarfs to prevent
seals from being damaged.
Avoid surface scratches, for example by using
masking tape.
I
NSTALLATION
STEP
8
B
:
Installing the cover profi le
Ensure that you saw the profi le perpendicular.
length cover profi
le
=
total distance between the
profi
le brack
ets
(outer edge) + 4 mm
The end cap
it exactly into the cover pro-
fi le
uand form a fl ush edge. In the case of
covers between post and post end caps
are
not required.
M5
total distance between the
profi
le brack
ets
(outer edge)
2 mm
2 mm
N
OTE
N
OTE
Ensure the correct positioning of the cover
profi le
(short side facing upwards).
Open casement electrically if appropriate
(to have a better access to the screws
).
4
4
4
4
5
6
7
