Figure 63: Failure
For further information, please also refer to <Corrective action>.
8.3.
Indication lights of local controls
Figure 64: Arrangement and signification of indication lights
[1]
Marking with symbols (standard)
[2]
Marking with figures 1 – 6 (option)
1
End position CLOSED reached (blinking: operation in direction CLOSE)
2 Tc
Torque fault CLOSE
3
Motor protection tripped
4 To
Torque fault OPEN
5
End position OPEN reached (blinking: operation in direction OPEN)
6
Bluetooth connection active
Modify indication light assignment (indications)
Different indications can be assigned to LEDs 1 – 5.
Device configuration M0053
Local controls M0159
Indication light 1 (left) M0093
Indication light 2 M0094
Indication light 3 M0095
Indication light 4 M0096
Indicat. light 5 (right) M0097
Signal interm. pos. M0167
Defaut values (Europe):
Indication light 1 (left)
=
End p. CLOSED, blink
Indication light 2
=
Torque fault CLOSE
Indication light 3
=
Thermal fault
Indication light 4
=
Torque fault OPEN
Indicat. light 5 (right)
=
End p. OPEN, blink
Signal interm. pos.
=
OPEN/CLOSED = Off
Further setting values:
Refer to Manual (Operation and setting).
49
SAEx 07.2 – SAEx 16.2 / SAREx 07.2 – SAREx 16.2 Control unit: electronic (MWG)
ACExC 01.2 Non-Intrusive Modbus TCP/IP
Indications
