manualshive.com logo in svg

Augmedics XVISION-SPINE, User Manual, Page: 12 / 31

Share
Download
Augmedics XVISION-SPINE User Manual Download Page 12

Augmedics Ltd • xvision-Spine User Manual
Version 7

2.2. Electromagnetic Compatibility

The

XVS

system complies with electromagnetic compatibility standard IEC/EN 60601-1-2. The

system is Class A compliant.

2.3. Protection against EMC Interference

Caution:

Changes or modifications to this equipment not expressly approved by the party
responsible for compliance [Augmedics Ltd] could void the user’s authority to
operate the equipment.

2.4. RF Exposure

This product contains FCC ID: 2AR2O-VOB-P3310.

RF Exposure

: This device has been tested for compliance with FCC RF exposure limits in a

portable configuration. This device must not be used with any other antenna or transmitter
that has not been approved to operate in conjunction with this device.

The

XVISION

-S

PINE

Footswitch contains FCC-ID: 2AODW-NRF24L01SMD

The optional Tablet accessory contains FCC-ID: PD98265D2.

Warning:

Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to
any part of the

XVISION

-S

PINE

system, including cables specified by the

manufacturer. Otherwise, degradation of the performance of this equipment
could result.

Caution:

Any changes or modifications not expressly approved by Augmedics Ltd could void
the user’s authority to operate the equipment.

2.4.1. FCC Class A

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference than may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is

2-2

Summary of Contents for XVISION-SPINE
































Reviews:

No comments