-
INSTALLER
HIGH-TEMPERATURE ENERGY EFFICIENT HEAT PUMP
MANUAL
-
12
3.1.2.2 - Fitting the Pilot to the wall
3.1.2.3 - Fitting and placement
The Pilot must be fi xed vertically to a strong supporting wall
using three Ø8 lag screws.
Removing the
front panel
The Pilot must be fi tted at least 300mm above any obstacles to
enable the hydrualic connection to be made with the bottom of
the appliance.
It should be fi tted at least 100mm away from the ceiling to allow
easy access to the manual air valve.
It must be fi tted at least 100mm away from walls on either side.
