background image

-2-

YOUR KEYCHAIN TRANSMITTERS:

ARMING THE SYSTEM (CHANNEL 1): ACTIVE

1. Turn off the engine, exit the vehicle, and close all doors.
2. Press and release the Lock/Unlock button on the keychain transmitter.

The vehicle’s parking lamps will flash once (optional), and the doors will lock.

WARNING! Excessive pressure on the transmitter button will damage

the internal components on the circuit board. All that is
required is a light push to the button.

ARMING THE SYSTEM (CHANNEL 1): BACK - UP PASSIVE ARMING

1. Turn off the engine, exit the vehicle, and close all doors.
 Note: As an added convenience, the automatic passive arming will not begin

until all doors are closed, allowing passengers to exit the vehicle at
their convenience.

2. In 30 seconds, the vehicle’s parking lamps will flash one time (optional),

indicating the  system is ARMED.

OPTION NOTE: The keyless entry control module can be programed to
either;

A. Automatically lock the doors during step 2 above.
or....
B.
 Only lock the doors when step 3 is executed.

3. If you wish to ARM the system immediately, simply press and release the

Lock/Unlock button on the keychain transmitter. The vehicle’s parking
lamps will flash once (optional), and the doors will lock.

PROTECTION WHILE THE SYSTEM IS ARMED:

1. Opening any door will cause the vehicle’s interior lights (and parking

lamps, optional) to flash for 30 seconds, then stop and automatically re-set.

      If the potential thief left a door opened, the lights will flash for six 30 second

cycles, then ignore the opened door.

2. Whenever the system is armed, the vehicle’s starter will be bypassed

(optional).  If a thief should choose to ignore the flashing lights, the vehicle
can not be started.

DISARMING THE SYSTEM (CHANNEL 1):

1. As you approach the vehicle, press and release the Lock/Unlock button on

the key chain transmitter.

2. The vehicle’s parking lamps will flash 2 times (optional), the doors will

unlock, and the vehicle’s interior courtesy light will turn on for approximately
20 seconds, indicating that the system is disarmed.

Summary of Contents for PRO9246FT3

Page 1: ...rtesy Lights will illuminate when the doors are remotely unlocked providing both convenience and added security to the passengers l Remote Keychain Panic allows activation of the vehicle s parking lights in emergencies at distances up to 75 feet from the vehicle l Programmable Auto Lock Unlock via the ignition key l Channel 2 from the keychain transmitter activates the remote trunk release relay w...

Page 2: ...atically lock the doors during step 2 above or B Only lock the doors when step 3 is executed 3 If you wish to ARM the system immediately simply press and release the Lock Unlock button on the keychain transmitter The vehicle s parking lamps will flash once optional and the doors will lock PROTECTION WHILE THE SYSTEM IS ARMED 1 Opening any door will cause the vehicle s interior lights and parking l...

Page 3: ...Valet switch allows you to temporarily bypass all security functions eliminatingtheneedtohandyourtransmittertoparkingattendantsorgarage mechanics When the system is in the valet mode all security functions are bypassed however the remote door locks will remain operational To use the valet mode 1 Enter the vehicle and turn the ignition key to the on position 2 Move the valet toggle switch to the on...

Page 4: ...re that can be wired to a number of different optional accessories Some of the more common uses for this channel are RemoteCarStarter availableformostautomatictransmission fuelinjected vehicles Remote Window Roll Up available for most vehicles equipped with power windows To activate the optional accessory 1 Press and release the Lock Unlock Option buttons on the keychain transmitter simultaneously...

Reviews: