The Remote Control is recommended for use in
systems comprising of three or more
interconnected Smoke/Heat Alarms.
The Remote Control should be wall mounted at
standard light switch level to allow easy access.
LOCATE
:
HUSH
:
TEST
:
MAINS CHECK
:
If alarms sound, press
Locate
to allow the source of alarm
to be identified audibly.
Press
Hush
to silence nuisance alarms.
Operate weekly to
Test
the alarms. Can also be used to
give a manual alarm
Test
will not operate with mains absent.
Position the Remote Control in a location that will allow it
to be easily accessed. In the majority of installations this
will be in a hallway, possibly next to the master bedroom.
It should be installed at the standard light switch height.
The Remote Control can be surface mounted using the
mounting box provided or alternatively it can be
recessed into a standard back-box (not included).
If a metal back-box is used it must have a minimum depth of 35mm.
Up to four Ei1529RC System Remote Controls can be used in a system.
SYSTEM
REMOTE CONTROL
INSTRUCTIONS
Model
Ei1529RC
1. Press the TEST switch
Now check all the alarms sound and the red lights
on the covers flash rapidly. Then turn off the
TEST
switch.
This is equivalent to pressing the test button on all
alarms simultaneously.
It also checks that the remote control is receiving
mains power.
2. If the alarms
do not
sound
Check for the green mains light on the front cover
of the alarms.
If all alarms do not have the green mains light on,
check fuses, circuit breakers etc. (see Smoke/Heat
Alarm instructions for further details).
• Test Switch
– use to test the Smoke/Heat Alarms remotely.
Ei Electronics guarantees this product for five years from date of purchase against any defects that are
due to faulty materials or workmanship. This guarantee only applies to normal conditions of use and
service, and does not include damage resulting from accident, neglect, misuse, unauthorised
dismantling, or contamination howsoever caused. This guarantee excludes incidental and
consequential damage. If this product should become defective within the guarantee period, it must be
returned, with proof of purchase, carefully packaged, with the problem clearly stated (see addresses
below). We shall at our discretion repair or replace the faulty unit. Do not interfere with the product or
attempt to tamper with it. This will invalidate the guarantee, but more importantly may expose the user
to shock or fire hazards. This guarantee is in addition to your statutory rights as a consumer.
FIVE YEAR GUARANTEE
4
1
The crossed out wheelie bin symbol that is on your
product indicates that this product should not be disposed
of via the normal household waste stream. Proper
disposal will prevent possible harm to the environment or
to human health. When disposing of this product please
separate it from other waste streams to ensure that it can
be recycled in an environmentally sound manner. For
more details on collection and proper disposal, please
contact your local government office or the retailer where
you purchased this product.
WEEKLY TESTING
Aico Ltd
. Mile End Business Park,
Maesbury Rd, Oswestry,
Shropshire SY10 8NN, U.K
Tel: 0870 758 4000
www.aico.co.uk
Ei Electronics.
Shannon, Ireland.
Tel: +353 (0)61 471277
www.eielectronics.com
© Ei Electronics 2007
P/N B16112
Rev0
Bedroom
Landing
Hallway
Bedroom
WARNING:
For use only with the following models:
Smoke/Heat/CO Alarms - Ei161RC, Ei164RC, Ei166RC, Ei261ENRC, Ei261DENRC
Ancillary Devices - Ei128RBU, Ei169/160, MCP401RC
DO NOT
use any other models with this system remote control
SITING
B16112-R0-Ei1529RC3-U&C BOOK 19/4/07 9:18 AM Page 1
